Radxa ROCK Pi 4B
Radxa's RK3399 board. Image built, not yet tested.
Download
vos-arm64-testing-rockchip-369973e57.raw.zst, 1543 MiB
| Image | Rockchip |
|---|---|
| SoC | Rockchip RK3399 |
What works
| audio | display | ethernet | gpu | suspend | usb | wifi |
|---|---|---|---|---|---|---|
| untested | untested | untested | untested | untested | untested | untested |
Downloads
Nightly
| Image | Version | Size | Date | Checksum | File |
|---|---|---|---|---|---|
| rockchip arm64 | 369973e57 | 1543 MiB | 2026-10-19 | sha256 | vos-arm64-testing-rockchip-369973e57.raw.zst |
How to flash the image?
- Download
vos-arm64-testing-rockchip-369973e57.raw.zstand check it against its.sha256file. - Replace
/dev/sdXwith your target device, then run:
zstd -dc vos-arm64-testing-rockchip-369973e57.raw.zst | sudo dd of=/dev/sdX bs=4M status=progress conv=fsyncA graphical disk-image writer can do the same job; decompress .zst files first. Writing erases the target device, so check its name before you start.
The pack image ships rk3399-rock-pi-4b.dtb for this board. Nobody has reported testing it yet.
Specifications
| Item | Value |
|---|---|
| CPU | Rockchip RK3399, dual-core Arm Cortex-A72 at up to 1.8 GHz and quad-core Cortex-A53 at up to 1.4 GHz |
| GPU | Arm Mali-T860 MP4, OpenGL ES 1.1/2.0/3.0/3.1/3.2 and OpenCL 1.2 |
| Storage | microSD up to 256 GB, eMMC module up to 128 GB, M.2 M-key for NVMe up to 2 TB |
| Ethernet | Gigabit Ethernet, PoE with a separate HAT; RTL8211E PHY |
| Wireless | 802.11 b/g/n/ac Wi-Fi 5 and Bluetooth 5.0 with BLE, AP6256 module |
| Video | HDMI up to 4K at 60 Hz, MIPI DSI up to 1080p at 60 Hz |
| Audio | One 3.5 mm jack with microphone input, codec up to 24-bit at 96 kHz |
| USB | 2 × USB 2.0 host, 1 × USB 3.0 host, 1 × USB 3.0 OTG |
| Headers | 40-pin GPIO, MIPI CSI with 2 lanes |